How to set up your Super King Yona bed [V2]

The Yona Super King bed is our biggest and most luxurious size! But that doesn't mean it isn't simple to set up. All that's required is your hands and some cardboard.

Step 1

Take both halves of your bed out of the box, and put them next to each other.

Step 2

Grab the cardboard that’s closest to you, and stretch it out! 

You should stretch it until it’s as long as your Super King mattress (that’s 203cm).

Do this for both halves!

If you have a partner with you, they can hold the end of the bed that’s on the wall as you pull it out, so you can stretch it out without moving the bed off the wall.

Step 3

Stand between the two halves, and connect the flaps using the hooks. They should just slot in!

Just remember to be gentle, as you don’t want the flaps to fray in case you want to fold up & move the bed later on.

Instead of just forcing the hooks together and fraying them in the process, you should be slightly lifting the upper hook and gently placing it above the lower hook. This will keep the hook secure, and prevent fraying.

Step 4

You will now be connecting the flaps on the sides of the bed. Remember to slightly lift the upper hook and gently place it above the lower hook.

Step 5

Now you need to push the halves together, so they’re just about touching one another (but not overlapping).

You may need to adjust things a little bit after pushing them together. If a few of the flaps between the two halves become unhooked in the process of putting them together, it doesn’t really matter. You will never be able to see this, and it doesn’t affect the strength or durability of the bed!

Step 6

(Gently) place your mattress on top of the bed! This step is usually easier with a partner, depending on how heavy your mattress is.

Step 7

Do some final adjusting, tuck in the bed if it’s sticking out, and re-hook any flaps that have come undone.