How to set up your Scandi King Single Yona bed

What's in the box: 

  • 16 x Partition A



  • 2 x KS1 Cover



  • 2 x KS2 Cover



  • 2 x Connector Z

 

Section 1. Assemble the internal partitions for one quarter of the bed

What you'll need: 16 x Partition A

1. Fold along the creases, ensuring the guide letters are hidden on the underside


2. Connect partitions to form a grid
Click here for recommended method of assembling the grid


3. It should look like this when done


Section 2. Slotting in the cover

What you'll need: 1 x KS1 Cover, 1 x KS2 Cover, and 1 x grid

1. Ensure the cover is folded well along all the existing creases. The guide letters should be facing inward, they will not be visible on the outside of the bed


2. Fold the bottom flaps of the cover, and tuck them underneath the grid. We will slot them in properly a little later


3. Fold the long flap into the corresponding slot, and fold the 2 shorter tabs into their slots


4. Flip the whole thing upside down, and you can now properly fold the flaps on the underside into their corresponding slots


5. Flip the whole thing upside down again, and fold in the small excess flap that says “FOLD IN” (there is no slot for this flap, it should just be loosely folded inwards)


6. Repeat section 2 to slot in cover S2, on the other side of the grid


Section 3. Repeat for the 2nd grid

1. Repeat sections 1 and 2 to make the 2nd grid

 

First Image Second Image


Section 4. Put all the pieces together and set up your bed

1. Align the grids to form your bed


2. Connect the grids by inserting the 2 connectors

3. The Z connectors sit on the sides of the bed. They do not need to be folded, and just need to be squeezed in to connect the two halves

4. Set up your bed and you’re done!