How to set up your Queen Yona bed [V2]

Our Queen bed is our most popular size! Don't worry, there are no tools required for this set up - just your hands and some cardboard.

Step 1

Take both halves of your bed out of the box, and put them next to each other.

Step 2

Grab the cardboard that’s closest to you, and stretch it out! 

You should stretch it until it’s as long as your Queen mattress (that’s 203cm).

Do this for both halves!

If you have a partner with you, they can hold the end of the bed that’s on the wall as you pull it out, so you can stretch it out without moving the bed off the wall.

Step 3

Stand between the two halves, and connect the flaps using the hooks. 

You will need to first push the flaps inwards, towards the bed, and then hook them together. You can see this process in the video above.

Just remember to be gentle, as you don’t want the flaps to fray in case you want to fold up & move the bed later on.

Instead of just forcing the hooks together and fraying them in the process, you should be slightly lifting the upper hook and gently placing it above the lower hook. This will keep the hook secure, and prevent fraying.

Step 4

On each side of the bed, connect the flaps using the hooks!

Like before, you will need to first push the flaps inwards, towards the bed, and then hook them together. You can see this process in the video above. Again, remember to be gentle!

Step 5

Now you need to push the halves together, so they’re just about touching one another (but not overlapping).

You may need to do some minor adjusting to get the bed to the right length and width.

Step 6

(Gently) place your mattress on top of the bed! This step is usually easier with a partner, depending on how heavy your mattress is.

Step 7

Do some final adjusting, tucking in the bed if it’s sticking out.