How to set up your King Yona bed [V1]

The Yona King bed is big and luxurious! But that doesn't mean it isn't simple to set up. All that's required is your hands and 5 mins of your time.

Step 1

Take both halves of your bed out of the box, and put them next to each other.

Make sure that the slits in the cardboard are on the bottom, i.e. the slits should be touching the floor, rather than pointing up to the roof.

Step 2

Grab the cardboard that’s closest to you, and stretch it out! 

You should stretch it until it’s as long as your King mattress (that’s 203cm).

Do this for both halves!

If you have a partner with you, they can hold the end of the bed that’s on the wall as you pull it out, so you can stretch it out without moving the bed off the wall.

Step 3

If you need to, you can adjust the bed so it’s nice and straight. It doesn't have to be perfect though, as you can also adjust it later, even once the mattress is on the bed.

Step 4

Stand between the two halves, and connect the flaps using the hooks. They should just slot in!

Just remember to be gentle, as you don’t want the flaps to fray in case you want to fold up & move the bed later on.

Step 5

Now you need to push the halves together, so they’re just about touching one another (but not overlapping).

You may need to adjust things a little bit after pushing them together. If a few of the flaps between the two halves become unhooked in the process of putting them together, it doesn’t really matter. You will never be able to see this, and it doesn’t affect the strength or durability of the bed!

Step 6

On each side of the bed, connect the flaps using the hooks! Again, remember to be gentle.

Step 7

(Gently) place your mattress on top of the bed! This step is usually easier with a partner, depending on how heavy your mattress is.

Step 8

Do some final adjusting, tuck in the bed if it’s sticking out, and re-hook any flaps that have come undone.