How to set up your pair of Yona Bedside Tables

Step 1

Carefully unpack your box! Inside you will have everything you need for two bedside tables.

We'll start by setting up the 1st bedside table. Afterwards, we'll move on to the second.

Step 2

Grab the large shell and the bottom piece. The bottom piece will have holes for 4 tabs. Then slot the bottom piece into the shell, using two tabs on each side. The tabs may require some gentle wiggling - take your time, and don’t rush it :)

Step 3

Gently rotate the shell upside down, so the bottom piece you just slotted in is on the floor!

Open up the two flaps on the side, and fold in the flap that secures the bottom. You can then fold in the side flaps, to secure the sides.

Step 4

Gently twist the shell around, and grab the flat shelf.
There are some narrow wings on each side of the shelf. As shown in the video, you will need to fold up the wings along the dotted line - the wings should protrude up and down.

The shelf will slide gently into the back of the shell, there is a slot for it in the flaps that secure the side. It can take a little maneuvering for the wings to fit flush along the side, so take your time with it.

Step 5

Grab the small piece that will strengthen the top, and slot it right underneath the top, above the flap, pushing it all the way in.

Step 6

Now that the shelf is in and the top is strengthened, we can close up the back. Close the flaps that make the back of the shell precisely in the order shown in the video.

Gently twist the shell around so you are facing the front, and flatten the tab that may be poking out in the middle.

Step 7

Insert the covering piece, that will add an extra layer of strength, and will give your bedside table a clean, finished look.

Step 8

Push up the top piece if it has come loose.

Step 9

Then the finishing touch - slide in the draw.

Voila, you have a completed bedside table!

Step 10

Complete the above steps to put together the second bedside table.